NIE Marketable Products


1- Surface Mount Technology Production Lines (SMTPL)

Surface Mount Technology Production Lines (SMTPL) facility is equipped with state of the art SMT stuffing and rework machines. Any sophisticated job can be done using these machines.
Here are the product details of developed/under-development at SMTPL facility.


LED Light: FALL CEILING 2’x2’ PANELS

Specifications
Length x Width: 2 feet x 2 feet.
Power Consumption: 36 Watts per LED panel (replacement of 4 tube lights in Fall Ceiling panel).
Power factor: 0.98.
Beam Angle: 120 degrees.
Input Voltage: 85 Volts – 265 Volts.
Light Intensity: 80- 90 Lumens/Watt.
Color Temperature: 5500k – 6500k.
Weather proofing: Conformal Coated.
Life Span: 60,000 hours.
Pay Back Period: 1 year approximately.
234

LED Street Light

Specifications
Length x Width: 0.3 feet x 1.2 feet approximately(Dimensions of 50 Watts Street Light).
Power Consumption: 100 Watts per LED panel, variants of 50 Watts and 25 Watts are also available.
Power factor: 0.98.
Beam Angle: > 120 degrees due to Batwing design.
Input Voltage: 85 Volts – 265 Volts.
Light Intensity: 90-100 Lumens/Watt.
Color Temperature: 5500k – 6500k.
Weather proofing: Conformal Coated.
Heat Dissipation: Die casted heat sink with galvanized fixture.
Life Span: 60,000 hours.
Pay Back Period: 1 year approximately.
234

LED Tube Lights

Specifications
Length x Width: 4 feet x 0.25 feet approximately.
Power Consumption: 36 Watts per LED panel.
Power factor: 0.98.
Beam Angle: 120 degrees.
Input Voltage: 85 Volts – 265 Volts.
Light Intensity: 80-100 Lumens/Watt.
Color Temperature: 5500k – 6500k.
Weather proofing: Conformal Coated.
Life Span: 60,000 hours.
Pay Back Period: 1 year approximately.
234

2- 3KVA Solar Based Inverter

Specifications.
  • Number of Solar Panels: 16.
  • Number of Batteries: 4.
  • Combination of Batteries: Series Combination.
  • Rating of Batteries: 12V and 100AH each.
  • Output Voltage of Solar Panels: 66V DC.
  • Output Voltage of Solar Charge Controller: 48V DC.
  • Cut off Point of Batteries: 40V DC.
  • Output Voltage of Solar Based Inverter: 220V AC.
  • Output Frequency of Solar Based Inverter: 50Hz.
  • Power Output: 1.8kW.
234

3- 1KVA Smooth Power Line Conditioner

Specifications
  • Input Voltages: 160- 260 VAC.
  • Output Voltages: 220 VAC - +-10 VAC.
  • Frequency: 50Hz.
  • Power: 1KVA.
  • Pure Sinewave output.
  • Power factor Correction.
  • Transformer less design.
  • Serge Protection, Short circuit protection, soft start.

4- GSM Based Energy Meter

Specifications
  • Single phase.
  • AT mega 328P microcontroller.
  • Voltage measuring.
  • Current measuring.
  • Display of Power Consumption.
  • Multiple load control through SMS.
234

5- ECG Machine

Specifications
  • Main Power: 220 VAC.
  • Battery time: 1.5 hr Acquisition and Printing.
  • Standard 12- Lead data Acquisition.
  • Printing Format: A4 Thermal Printer.
  • Storage Capacity: 0.3 million.
  • Display: 7” Colour.

6- Electronic Voting Machine

Specifications
Control Unit
  • LCD: 16x2 alphanumeric
  • Dimensions: 6”. (l) x 4” (w) x1.5” (h).
  • Temperature Range: -40°C to 85°C.
  • Memory Storage: 4KB EEPROM memory a well as external 4GB SD memory card.
  • Battery Capacity: 14.8V 3000mAh battery capable of providing 16-hour backup on full operation.
Vote Casting Unit
  • Microcontroller: Atmel ATmega2560
  • Dimensions: 18” (length),6” (width) , 1.5” (height).
  • Buttons: Thirty (30) push-buttons switches corresponding to number of candidates.
  • Speaker: Single 4 ohms impedance, 3W, 60Hz ~ 20KHz audio speaker
  • Buzzer: A 20 ohm impedance piezoelectric buzzer operating at 5V DC.
  • Temperature Range: Between -40°C to 85°C.
  • Memory Storage: Internal microcontroller-4KB EEPROM memory as well as external 4GB SD memory card.
  • Battery Capacity: 14.8V 3000mAh (44Wh) batteries capable of providing 16-hour backup on full operation.
Ballot Printing Unit
  • Features: Full/partial cut support, bitmap image printing, 1D and 2D barcode support
  • Printer Dimensions: 145(Width)  192(Depth)  148(Height) mm .
  • Print Speed: 200mm/s, 1600 dots/line.
  • Paper Roll: 80 mm width.
  • Temperature Range: Machine operating capability between 5-45ºC. (-20 to 60ºC storage temp).
  • Memory Storage: 384 K bytes internal (Flash) memory, 4 k bytes / 45 bytes buffer size.
234

NIE Services


1. Components Stuffing through Surface Mounting Technology.

  • Manufacturing of Various Types of Electronic Boards.
  • Manufacturing of SMT LED Panels

2. Electronic/Electrical Equipment/Components Testing.

Testing of Electronic Product (Lab Qualified and Accredited ISO 17025 Standard).
  • Electrical Safety Tests.
  • EMC/EMI Test (Conducted Immunity Test).
  • Environmental Test.
  • Specification Tests.
  • Lamp Test.
  • Calibration of Electronic Test Equipment.

3. Printed Circuit Boards.

  • Printed Circuit Board (PCB) Design and Fabrication.
  • Single, Double, Multilayer & Flexible PCBs.
  • Services Provided to Public & Private Sector.

4. Computerized Automobile Tuning (CAT) Facility.

  • Computarized Tuning.
  • Fuel Injector Service.
  • Throttle Body Service.
  • Idle Speed Correction.
  • Sensor and Actuator Testing and Servicing.
  • Cylinder Compression Testing.
  • Tappets and Valves Adjustment.
  • Ignition Timing Fine-tuning.
  • Spark Plug Gap Correction.
  • Unburnt Fuel Validation.
  • Carburettor Servicing and AFR Correction.
  • Emission Testing.
  • Diagnostics Trouble Code (DTC) Reading and Removal.
  • Digital Odometer Correction.
  • Sensor Key ( Smart or Immobilizer) Programming.
  • ECU Firmware Upgradation.
  • Electronic Throttle Body and Power Steering Calibration.
  • Continuous Variable Transmission Calibration.
  • SRS Air Bag, Climate Control AC, Electronic Emission Control (ETC), EBS, ABS Diagnosis.
  • GPS tracker Installation.

5. Energy Audit.

  • Power factor Analysis.
  • Harmonic Analysis.
  • Load Analysis (Motors, Compressors, etc.).
  • Thermo graphic Analysis of inductive load.
  • Power Safety analysis.
  • Suggestions for energy savings.

6. Training Programs.

Advance Trainings.
  • PLCs, HMI, SCADA.
  • IC Nanometer Design.
IT & Electronics Trainings.
  • Web designing, Network Administration, Graphics Designing, Computer applications.
  • Home Appliances, Electronics Circuit Design, PCB Design, Basic & Digital Electronics.