Ms. Fouzia Ashfaq
Designation: Senior Research Officer Experience:17 Years experience of Research & Development at NIE. Email:fouzia76us@yahoo.com
Center for Quality Testing, Calibration and Certification of Electronic Products
Feedback and Complaints
For feedback and complaints, you can directly send an Email to: muhammadabdullah352@gmail.com
Complaint Handling Process
Center for Quality Testing, Calibration and Certification of Electronic Products
The Center for Quality Testing, Calibration and Certification has vast capability to provide testing and calibration services in various area and fields of electronics such as electrical safety, electromagnetic compatibility (EMC), environmental testing.
Calibration Services are also a strong aspect of the center which includes Multi-meter, Function Generator, Oscilloscope, Power supplies, Resistance, Capacitance boxes and Optical Tachometer calibration etc.
The center is accredited from Pakistan National Accreditation Council (PNAC) for testing in accordance with ISO/ IEC 17025:2017 standards. Our major customers are academia, industry & users of electronic products. Customer demanded/customized testing and calibration are our major expertise.
Vision
- To be recognized as most reliable and recognized national quality assurance center serving customers from manufacturing industry to trading sectors.
- To provide a reliable technology-based service of testing and certification of electronic products based on internationally recognized standards;
- Provide pre-compliance training to manufacturers and traders of electronic goods and to contribute in boosting exports of Pakistan by reducing technical barriers to trade
- Keep track of changing International trade regulations and safety standards to assist our clients in penetrating the global markets.
The Available Testing Services are as Follows
Testing Facilities |
|
| Electrical Safety Testing | EMC/EMI (Immunity test) |
|
|
| Lamp Test | Environmental Test |
|
|
The Available Calibration Services are as Follows
Calibration Parameters
- DC Voltage (0 - 1050 V); Measurement and Generation.
- AC Current (0 - 1050 V @ 10 Hz - 20 kHz Generation & 0 – 1000 V @ 3 Hz – 500 kHz Measurement).
- DC Current (0 - ± 22 A Generation and 0 – 10 A Measurement).
- AC Current (0 - ± 22 A Generation and 0 – 10 A Measurement).
- Resistance (1 mΩ - 100 MΩ Measurement and Generation).
- Frequency (0.1 Hz – 100 MHz Generation and unto 350 MHz for measurement).
- Inductance, Capacitance and Conductance (both measurement and Generation).
Typical Instruments calibration capability:
- Digital Multi-meter (up to 6.5 Digit Precision) and Analog Multi-meter
- Digital and Analog Oscilloscope
- Digital and Analog Power Supply
- Voltage Regulators
- Clamp Meter
- Capacitive, Inductive and Resistive Networks
- Frequency Counter
- Electrical Safety Analyzers (Voltage and Resistance Verification only)
- Function Generators
- LCR Meter
- Multi-function/ Multi-Product Calibrator
- Electronic Loads
- Thermocouple based Temperature meter
- Optical Tachometer
- Power Meter
Aforementioned equipment is listed on basis of past practices. Any equipment that comes under the category of above the parameters and is not mentioned in the above given list is encouraged to be put forward in request for quotation.
Center for Quality Testing, Calibration and Certification of Electronic Products
Contact Us
Mr. Zulfiqar Humayun
Industrial Liaison Officer
CQTC, NIE, Plot # 17, Street # 6, H-9/1, Islamabad
Telephone: (+92)-51-9265007
Fax: (+92)-51-4865438
Email-1: zulfiqarhumayun3@gmail.com
Email-2: abdullahtariq352@gmail.com
Center for Quality Testing, Calibration and Certification of Electronic Products
Trainings
CQTC is capable to provide following trainings to professionals from industry, academia, public and private sectors:
- Understanding and Implementation of ISO/ IEC 17025:2017.
- Measurement Uncertainty budgeting for accredited Testing and Calibration Laboratories.
- Risk Assessment, Decision rule, Statement of conformity etc.
- Quality System Documentation.
- Energy Auditing.
- Understanding and Implementation of EnMS ISO 50001, Energy Management Systems.
- Any other customized training related to above areas.
Publications:
- Minimum Switching Transitions for Multi-Stage CHB Inverter to satisfy IEC 61000 (3-6 & 2-12) in Medium Voltage. 2020.
- Establishment of an ISO/IEC 17025:2017 Accredited Electrical Testing Laboratory in Pakistan” is Accepted as a full paper in “the 2nd Asia Pacific International Conference on Emerging Engineering 2020 (APICEE’20).
Quality Assurance Team
Engr. Muhammad Abdullah Tariq
Designation: Technical Manager/ Research Officer
Qualification: BE (Mechatronics Engineering, NUST)
Experience: 2 Years’ experience of Testing and Calibration
Contact: 051-9265009 (Ext: 230)
Email: muhammadabdullah352@gmail.com
Muhammad Ali
Designation: Principal Technician/ Dy. Technical Manager
Muhammad Ali
Designation: Principal Technician/ Dy. Technical Manager
Qualification: DAE (Electronics), BA (Political Science)
Experience: 13 Year's of experience in testing and calibration
Contact: 051-9265009 (Ext: 128)
Email: muhammadalich83@gmail.com
Zulfiqar Humayun
Designation: Senior Technician/ Industrial Liaison Officer
Qualification: DAE (Electrical), BA (Fine Arts)
Experience: 18 Years of experience in testing and calibration. ISO 9001 certified.
Contact: 051-9265009 (Ext: 128)
Email: zulfiqarhumayun3@gmail.com